Class A (Diesel)

Everything on this page will fit your motorhome!

Hitch Bar Mounted
#10-4217 & #10-4217-3

These are our strongest Hitch bar mount skid wheels. 3" x 2-3/16" wheels are machined out of solid steel, with roller bearings and grease fittings for easy lubrication. Tough enough to be used on the largest and heaviest motorhomes.

Total height measures 3.5" from the top of mounting plate to the bottom of the wheel.

10-4217   Skid roller to fit 2-1/2" hitch bar                                             $166.35

10-4217-3   Skid roller to fit 3" hitch bar                                                $171.35

10-3224   Wheel only (includes roller bearing, zerk axle & nut)      $55.24

Spacer Kit for Hitch Bar Mounted Rollers         #10-5217


Spacer kits to extend the length of both hitch bar mount skid rollers are available. For hitches that have receivers welded to the bottom of the hitch bar the spacers can be bolted between the roller assembly and the bar. This lengthens the skid wheel assembly so that it hangs down lower than the hitch.

Drops the wheel down an extra 2.25" for a total height of 5.75" from the bottom of the hitch bar to the bottom of the wheel.

10-5217   Fits 2.5" Hitch Bar
10-5217-3   Fits 3" Hitch Bar

Spacer kits contains spacers, plates, and hardware for one pair of hitch rollers only! The parts are shown in red.

10-5217   Sold in pairs of two   $40.79

10-5217-3   Sold in pairs of two   $40.79
Roller Skids        #10-4200
Replace old worn Skid Bars with "New Roller Skid Bars"

2.5" x 1.5" wide solid steel wheel with .5" diameter hardened steel axle (no bearings).


10-4200   Sold in pairs of two   $128.97
Roller Skids        #10-4201
Replace old worn Skid Bars with "New Roller Skid Bars"

3" x 2-3/16" wide solid steel wheel with roller bearings, grease seals, and zerk axles for easy lubrication.


10-4201   Sold in pairs of two   $194.49
Maxi steel Roller, Weld on
#10-4203

3" x 2-3/16" wide solid steel wheel with roller bearings, grease seals, and zerk axle for easy lubrication.

Total height measures 3.375" from the top of mounting plate to the bottom of the wheel.

10-4203   Sold individually   $69.86
Micro steel Roller, Weld on
#10-5202

The Micro is Paktron's lowest profile roller. Ideal for any low vehicle of any size or type. This 2" x 2" solid steel wheel has a hardened steel spanner bushing, zerk axel, and grease seals to keep grease in and dirt out.

Total height measures 2.375" from the top of the mounting plate to the bottom of the wheel.

10-5202   Sold individually   $37.64